Sawmill Services Pty Ltd

Model MJ145E Working thickness 10-170mm Max working width 350mm Min working length 600 400mm Roller feeding table 1200mm Saw blade diameter 355-505mm Saw spindle diameter 60mm Bore diameter of saw blades 80mm Saw spindle speed 2600r min Saw spindle motor 55kw Feeding motor 4kw Lifting motor 0.75kw Feeding speed 3-24m min Total power 59.75kw Dust port diameter 150mm 2pc Air source pressure 0.3-0.6MPa Overall size 4460 1790 1890mm Weight 3500kg Comes with spare parts package, spaces, spare saw blades.

Various used tooling available.

Robland Multi function combination machine, consisting of 250 diameter blade, with tilt, 300 wide jointer, 300 wide thicknesser, mortising attachment, spindle moulder with feed unit and sliding table carriage. All single phase.

DS-25 - Twin Drum Sander Variable Conveyor Feed Speeds 635 x 127mm W x H Material Capacity Overview Manufactured in Taiwan Features 635mm width capacity 2 x 100mm dust outlets Variable speed conveyor feed Min Max work piece 6 - 127mm Industrial contactor switch with overload protection Dynamically balanced sanding drums ensure smooth running 2 x 127mm sanding drums, including 1 coarse 1 fine providing high efficiency sanding 2.2kW 3hp Induction 240V motor

Outfeed roller system complete with pusher, which pushes the timber onto the transfer chains. This is a heavy duty well made Australian piece of equipment and is quite heavy duty. See video on operation. Excellent condition.

Type EZ8 1 Throughput approx. for 16 20 screen 1.2-2.0 m3 hr of loose wood blocks Hopper opening 1000 x 1200 mm Hopper volume 1.3 m3 Rotor Diameter 386mm Rotor Length 1000 mm Rotor Speed 60 100 rpm Connection 250 mm Dimensions m 2.4L x 1.4W x 1.7H Weight 2800 kg Power Motor 18.5 kW motor Cutting System 30 x 30 mm Concave headed cutters Screen Size mm 16 20 mm common for chipboard mdf. 20 25mm common for pine off cuts. 10 12 mm common for briquetting . Various sizes available depend on throughput required. Throughput The throughput rate depends on material composition screen size Cont...

SCM M3 Multi Rip saw, has been used for cutting thin boards, has spare collars, arbor and spanners, feed mat very good condition. Set up with thin kerf blades, 3ph, 35hp motor. Maximum depth of cut 130mm, 400 long arbor, power rise fall for depth, variable speed on the feed mat.

Automatic Chain Sharpener Dinasaw model T-Rex, Australian made, any parts are readily available off the shelf, can be set up and run automatically, ideally suited to sharpening pack saw chains and those who require accuracy. It comes with 5 grinding wheels and 3 CMB wheels for sharpening. 240V.

Weinig 6 head moulder, power mat 500, set up for HSK tooling, through feed machine in very good condition. 12 inch x 7 inch capacity, has been in a retail yard, not production, in a jobbing situation. 2 spare spindles and no tooling. Short infeed table, overall condition of machine is good. Has 12kw and 18kw motors. Must be sold.

Weinig Gold 6 head moulder - 230x120, through feed moulder, this machine is as new, still has the paint inside the pick up hoods, has not been used. Comes complete with handbook, tooling, spanners and pick up hood. Would suit new buyer at a fraction of the cost of a new machine.

High Point horizontal band re-saw, twin blade, 2 off 20hp motors, variable speed hydraulic feed mat, digital read out for both horizontal positions, has blades wipers and cleaners along with wheel scrapers. This is a current model machine and surplus to requirements.

Stenner ST 100R Band Re-saw, 25hp main motor, 3ph, 4 inch wide blades, will also run the narrow blades. Blade to fence opening 300mm, blade to hob feed opening 230mm, maximum depth of cut 400mm, variable speed feed up to 60 metres a minute. This machine is out of a retail yard and has minimal use.